Select the active network interface from the left side menu that you want to uncover the Gateway address for. Type: arp -a (look for the MAC address of your access point, and note its IP address) Note: If a secondary AP is not in the ARP list of interfaces, you can also find its assigned IP by logging in to the main NAT router, and looking for it at the LAN wired clients list. Launch System Preferences and click on Network icon. Ping your network address (substitute your client IP's last number with. Find the MAC address of your access point (it is usually printed on its label). If the above does not work, or you have multiple access points and you are not connected to the main router, you can try the following solution: 1.

In the list, find the line that is your 'Default Gateway', this is your primary router/access point. Start > Run > type: cmd (to enter command prompt) 2. If the access point is the main ' gateway' NAT router on your network: 1. Another way is to use the netstat command. You can always try doing a factory reset of the ap, and connect to its default IP address (with its factory username/password), but then you have to reconfigure it to work with your network. Select the TCP/IP tab and locate the IP address next to Router. Find your gateway IP address listed next to Default Route. On the settings side bar, scroll down, and click Network option. The IP address may, or may not show in the DHCP client list on your main router/gateway. How to Find Default Gateway IP Address on Linux Heres the solution: Click the Settings icon on the left side bar. You need the AP IP to be able to connect and reconfigure it. The MAC address should be located on the back or on a sticker on the bottom of your gateway next to the power socket.

Sometimes you can have a wireless access point on your network that you do not know the IP address of.

How to find default gateway mac